Two similar double acting hydraulic cylinders are used to push products from a vertical stack into a conveyor belt, then into a container as shown in Figure 2. Draw the hydraulic circuit that will continuously remove products from the stack and fulfil the following requirements: a) In the active stroke, Cylinder A has to move first. Cylinder B starts to move with normal speed only when Cylinder A reaches the end of its travel. b) The extending speed of Cylinder B should be 70% of that of Cylinder A. c) Both cylinders should be able to retract together at the same time. The pressure needed for Cylinder Ato retract is 20 bar and that for Cylinder Bis 10 bar. d) The Conveyor belt has two actuators, both of them should be able to rotate together at the same time. e) Install a filter in the suction line to minimize contamination of hydraulic components. ) Install a safety circuit to prevent damage to system and injury to operating and maintenance personnel.